1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Scantronic i-on16 program remote

Discussion in 'Alarms, CCTV & Telephones' started by geewhiz, 7 Oct 2017.

  1. geewhiz

    geewhiz

    Joined:
    24 Feb 2013
    Messages:
    1
    Thanks Received:
    0
    Location:
    East Lothian
    Country:
    United Kingdom
    I’ve recently purchased an i-FB01 remote to replace a 2W-4B remote which has stopped working.

    The setup I have is a few PIR’s and a door sensor on the front door for the final door setting.

    When pressing set on the old remote I just heard two beeps from the control unit and the alarm was set, this was used when exiting using any door other than the front door.

    Since adding the new remote pressing set triggers the final door setting which is useless when I’m already outside.

    Is there a way to change this setting so that the alarm just sets without the final door setting?

    Thanks
     
  2. Sponsored Links
  3. EightyTwo

    EightyTwo

    Joined:
    14 Feb 2012
    Messages:
    1,126
    Thanks Received:
    169
    Location:
    Cambridgeshire
    Country:
    United Kingdom
    I don't think there is. Of course, you could always reprogram the partition as Timed Set...
     
  4. E999

    E999

    Joined:
    8 Feb 2010
    Messages:
    236
    Thanks Received:
    28
    Country:
    United Kingdom
    Sorry I cannot help as Ive not fitted one of these systems........

    We did have the Eaton rep around the other day and he was really pushing the new ION series as a credible alternative to Pyronix.
    The old scantronic stuff was so tuff and trouble free....I tried to bum a sample - no joys :)

    Matt
     
  5. DIYnot Local

    DIYnot Local

    Joined:
    3 Sep 2019
    Country:
    United Kingdom

    If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

    Select the supplier or trade you require, enter your location to begin your search.


    Are you a trade or supplier? You can create your listing free at DIYnot Local

     
Loading...

Share This Page