seized water pump

[vernerbongo2]

Hi

Have a seized water pump, (it hasn't been on for over a year) Normally you can take a cap off the end of it and free it with a flat screwdriver but this one seems to just have a screw in it, when loosened it doesn't seem to come out or do anything.
Any ideas

By the way I have bad acess so can't actually see the end of the pump.

 

[kevplumb]

if you mean a hexagon nut on the front unscrew it and pull it out then turn

View media item 27534

 

[seco services]

sounds like the old myson compact pump.
remove the black cover.
unscrew the nut pull it foreward and it will lock into the propeller and then try turn it.

 

[seco services]

good morning kev

 

[vernerbongo2]

sounds like the old myson compact pump.
remove the black cover.
unscrew the nut pull it foreward and it will lock into the propeller and then try turn it.

the black plastic cover can be used to unsrew the bolt it covers.
when you say pull forward do you mean pull it outward from the pump?

 

[seco services]

the black plastic cover can be used to unsrew the bolt it covers.
when you say pull forward do you mean pull it outward from the pump?

yes

 

[vernerbongo2]

the black plastic cover can be used to unsrew the bolt it covers.
when you say pull forward do you mean pull it outward from the pump?

yes

yes just looking at a website with those pumps.
Thanks I will try it tomorrow