Setup Bell Box for another are using OP

[SgtWilson1]

Related to my earlier post http://www.diynot.com/diy/threads/set-up-texecom-premier-elite-48-for-2-areas.424782/#3299886
If I use OP1 (or more than one OP if needed) in the XP8 for the Area B Bell, how do I wire for the 5 wires that are used for the panel bell output using the OPs. Bell and strobe and tamper?

 

[secureiam]

Output 1 prgram bell sab
output 2 program strobe
aux input program as bell tamper
take power from aux + and -

Thats your five wires

 

[sparkymarka]

You can use the programable Input on the 8xp for bell tamper this gives you the 0v and tamp return

 

[secureiam]

I will give that a check when I next have an 8xp in front of me, never used the aux input for bell and 0V, when programmed as bell tamper, but makes sense. Guess you get shown a way and you stick with it if it works.

 

[sparkymarka]

We all learn something by just reading the threads , I've also found some useful things on here that I've never known before

 

[SgtWilson1]

You guys might be learning the odd thing from each other - I'm soaking up this info like a sponge! - I'm reading everything more than twice just to keep up with it. I'm very grateful to you both - Thanks again