Shed build question

Joined
7 Sep 2007
Messages
55
Reaction score
6
Location
Oxfordshire
Country
United Kingdom
Links in this post may contain affiliate links for which DIYnot may be compensated.
Sponsored Links
Sponsored Links
is it possible to get nails for the gun to secure the timber to the base & if so what nails would you suggest.

I would imagine that concrete fence posts would be damaged quite severely if you tried to use a nail gun to secure timber to them.

If you did need to do this, then drilling and screwing would be a better option but you'd still need to be careful with the hole diameter and choice of rawplug/screw thickness, otherwise you risk splitting them.

However - if the posts are the type which are 'H' in cross-section and you are mounting the shed on the smooth side, then they may have metal re-enforcements uppermost which will make drilling tricky.

As mentioned above - a substantial shed, if built properly, probably won't need securing to the base.

Are you laying the concrete posts right next to eachother ? If so, I would be tempted to raise the shed up off the base to minimise potential water damage. Or - you could leave spaces between the posts to allow water to drain away. Just a thought, as my own shed base has rotted due to water getting under the shed and rotting the wooden batons it was mounted on.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top