I'm going to install a couple of domestic radials (2.5mm) as part of an assessment, plus a distribution circuit in 6mm, all will have partial conduit runs <5m.
The conduit for the DC will also have a short run of <2m of 2.5mm inside branching off and feeding another s/o.
I've applied all the neccessary rating factors and done all the calculations based on the cable being T&E, is there anything to stop me using single core cables in a situation like this as I fancy working with them
The conduit for the DC will also have a short run of <2m of 2.5mm inside branching off and feeding another s/o.
I've applied all the neccessary rating factors and done all the calculations based on the cable being T&E, is there anything to stop me using single core cables in a situation like this as I fancy working with them