- Joined
- 16 Dec 2018
- Messages
- 3
- Reaction score
- 0
- Country
I had a Drayton Wiser smart system installed, replaced this after 2 replacement hubs which appeared to be faulty. Now installed Hive, all working well until this morning when we got up to no heating. The same problem we had with the Drayton system!
The app on both says the heating is on but until I switch the boiler off then on again the CH doesn’t kick in. It’s almost like the boiler refuses to accept any signals until it’s beem restarted?
It only happens every now and then, majority of the time the CH turns on and off as instructed. I’m not sure what it could be as it’s so intermittent? Any ideas?
The app on both says the heating is on but until I switch the boiler off then on again the CH doesn’t kick in. It’s almost like the boiler refuses to accept any signals until it’s beem restarted?
It only happens every now and then, majority of the time the CH turns on and off as instructed. I’m not sure what it could be as it’s so intermittent? Any ideas?