- Joined
- 31 May 2007
- Messages
- 369
- Reaction score
- 0
- Country
Hello Everyone
I currently have 6x2 joists at 400 centres on the 1st floor.
If I insulate between them using an acoustic roll such as isover apr 1200.
Then overlay with existing floor boards then lay 18mm T&G chipboard, then lay laminate flooring with the correct underlay, from your professional or non professional experiences do you think I will pass a sound test in compliance with Part E?
The underside of the joists will have 12.5mm plasterboard and a skim of plaster.
Many Thanks[/code]
I currently have 6x2 joists at 400 centres on the 1st floor.
If I insulate between them using an acoustic roll such as isover apr 1200.
Then overlay with existing floor boards then lay 18mm T&G chipboard, then lay laminate flooring with the correct underlay, from your professional or non professional experiences do you think I will pass a sound test in compliance with Part E?
The underside of the joists will have 12.5mm plasterboard and a skim of plaster.
Many Thanks[/code]