Spotlight bulb- bulb replaceable or whole unit?

Joined
5 Jan 2007
Messages
578
Reaction score
14
Location
London
Country
United Kingdom
Hi Everyone
Please see pictures. Can bulb only be replaced or does the whole unit need replacing. By whole unit , I mean all that is hanging from the cable. There doesn’t appear to be any way of getting the bulb out of the housing. I had a look and it doesn’t look like the bulb itself drops from the casing like ones I have in my kitchen.

Also what is the name of the this type down light please?
Many thanks
 

Attachments

  • IMG_7345.jpeg
    IMG_7345.jpeg
    353.1 KB · Views: 25
  • IMG_7344.jpeg
    IMG_7344.jpeg
    399.5 KB · Views: 25
  • IMG_7343.jpeg
    IMG_7343.jpeg
    402.4 KB · Views: 26
Last edited:
Thank you. Seems the one I have is not available any more . Can’t seem to find exact match
Is there a direct replacement I can fit myself? Am not an electrician so looking for a straight forward replacement please
 
that's an integrated led downlight mate, the led chip and driver are built into the fitting so there isn't a separate bulb to drop out. pain in the neck when they go, you just have to replace the whole unit. if you pull the fitting down out of the ceiling spring clips, the wattage and cut-out size are usually printed on the side so you can grab a matching one from screwfix or toolstation.
 
It's my policy to only buy light fittings that can have a ordinary, off the shelf "lightbulb" fitted into it.

Even if it is occasionally something less common, such as an SES pygmy or candle.

(My fridge and cooker hood, respectively)
 
that's an integrated led downlight mate, the led chip and driver are built into the fitting so there isn't a separate bulb to drop out. pain in the neck when they go, you just have to replace the whole unit. if you pull the fitting down out of the ceiling spring clips, the wattage and cut-out size are usually printed on the side so you can grab a matching one from screwfix or toolstation.

Matching as in mechanically compatible and the same power consumption? Indeed.

Matching as in the same lumens output and colour temperature? Ah...
 

Attachments

  • IMG_7349.jpeg
    IMG_7349.jpeg
    384.8 KB · Views: 11
  • IMG_7358.jpeg
    IMG_7358.jpeg
    127.5 KB · Views: 11
Last edited:
The same way, live, neutral, earth, but connect the earths aswell....even though they probably aren't connected in the other spot lights.

Remove the flex from the new light if it comes with one.
 
Just the same but two wires in separate holes in each terminal, rather than two separate terminals.
 
Chap’s, it’s done and works! Thank you all so much. Tried to not let cables touch each other. Bit tricky but with patience, I think done it safely.
The earth wasn’t connected in previous unit but I connected it anyway in new unit. Not sure if that makes any difference, as there are about 20 of these and I suspect the rest won’t have earth connected either. Been working past 7 years so I guess it’s not an issue.
Thanks everyone
 

Attachments

  • IMG_7363.jpeg
    IMG_7363.jpeg
    365.1 KB · Views: 4

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top