- Joined
- 24 Jul 2022
- Messages
- 3
- Reaction score
- 0
- Country
Hi
I am having a problem with my stanley 80k twin burner tripping RCD at the consumer unit.
The tripping only occurs when the heating and cooker burners are running and the oven temp is set at 180 degrees or over, if the oven temp is set to anything under 180 degrees with both burners running, no problems.
Provided the heating burner is off the oven burner can be set to maximum with no problems.
I have replaced the oven thermostat which made no difference.
Any advice/ thoughts would be much appreciated.
I am having a problem with my stanley 80k twin burner tripping RCD at the consumer unit.
The tripping only occurs when the heating and cooker burners are running and the oven temp is set at 180 degrees or over, if the oven temp is set to anything under 180 degrees with both burners running, no problems.
Provided the heating burner is off the oven burner can be set to maximum with no problems.
I have replaced the oven thermostat which made no difference.
Any advice/ thoughts would be much appreciated.