Studwork brackets

[davebr1985]

Bit of an odd one but are there any brackets that I can screw to a 9" brick wall to allow me to build studwork off this. I'm trying to make a wall flush to hide a steel and also where the extension wall is 12" to lose that step also.

I know I can get 75mm l shape brackets but can I get a 2.4m long bracket the stud will slot into and be fixed where needed to make the wall straight?

I hope that makes sense but any help is appreciated

Thanks
Dave

 

[PrenticeBoyofDerry]

Metal or timber stud?
There are few brackets here that are designed for metal stud.
http://www.british-gypsum.com/~/med...um/SITE-BOOK/SITE-BOOK-GypLyner-UNIVERSAL.pdf

But why don't you just build the stud frame away from the wall, if head and sole plates are fitted securely, no need to tie in to the other wall!

 

[noseall]

What's wrong with plugs and screws?

 

[davebr1985]

I can use plugs and screws but thought a bracket system would be quicker and also mean I can lose any irregularities in the wall by leveling each stud without scribing it.

I may use a metal system as suggested but I have services runninrgb horizontally along the wall. Guess there is no issue with this just chop out the vertical to allow these to pass through and carry on !

Thanks
Dave

 

[noseall]

Sorry, yeah I get your gist.
Just do as PBD says and build with a gap off the wall.
You can stiffen the stud wall with the odd mid-span angle bracket if you wish.