could i put a commercial size sunbed on a spare 40amp breaker thanks
SUNBED
- Thread starter tashie
- Start date
Sponsored Links
Well nobody's gonna stop you. But it would be ill advised to do so, unless you have checked the rating of the sunbed is suitable for such a large circuit, taken into account the cable used and the distance of the circuit, any RCD protection nessecary, the earthing system of the installation, polarity of same, insulation resistance etc etc.
This is not a job to be taken lightly. Oh, and yes, if you turn orange, you WILL get skin cancer. "it wont happen to me" . . actually . . yes . . . it will.
If this is in commercial premises, you must be insured to do the work. You probably arent. If this is in domestic premises, you must notify your local council.
It's frightening that you're still out there attempting to do electrical work for commercial gain, when you don't have the first clue what you're doing. 
Sponsored Links
thanks for youre help oh and sarcasm was just a question
So now what are you going to do?
H
holmslaw
..
You all seem to misunderstand
Tashie is not installing this sunbed for him self.
He is infact masquerading as an electrician and charging soom poor unsuspecting customer for his services.
Tashie is not installing this sunbed for him self.
He is infact masquerading as an electrician and charging soom poor unsuspecting customer for his services.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
