Suprima 40 flow/return pipe swap!

Joined
17 Mar 2020
Messages
36
Reaction score
1
Country
United Kingdom
Hi folks.

I have a suprima 40 which I was going to swap the heat exchanger for a new to keep it going a bit longer. The gas engineer can't budge the nuts! We're left with trying to source new pipes and cut the old ones.

The part number baxi gave me seems incorrect (5102730), the pipes are a different shape.

Worst case could you use the 'flanged' end from a couple of those pipes, new nuts and couplers if the old pipes are cut off the exchanger or are we asking for trouble?

The boiler works well enough but knocks a bit on heat up. Had a power flush too which improved it a little. Thanks for any advice!
 
Sponsored Links
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top