- Joined
- 11 Jan 2021
- Messages
- 4
- Reaction score
- 0
- Country
Morning all, this is my very first post. So here goes.
I have a bathroom light switch on the outside of a false wall. I have installed a couple of these 'soft touch' sensors which were suitable for leds. Now that we have little kiddies in the house to avoid disturbing them at night. Unfortunately, these units never seem to work, from memory I could never get them to turn off, I assumed that they may be dodgy units.
Luckily, I was on a construction site with some electricians, I sent them some pictures for advice. It appears i need a 'switch' wire' to make it work. There are only 2 wires going to the switch.
My question is as a complete novice how can i install this 3rd wire myself?
I have a bathroom light switch on the outside of a false wall. I have installed a couple of these 'soft touch' sensors which were suitable for leds. Now that we have little kiddies in the house to avoid disturbing them at night. Unfortunately, these units never seem to work, from memory I could never get them to turn off, I assumed that they may be dodgy units.
Luckily, I was on a construction site with some electricians, I sent them some pictures for advice. It appears i need a 'switch' wire' to make it work. There are only 2 wires going to the switch.
My question is as a complete novice how can i install this 3rd wire myself?