Tacwise Electric 500EL Pro????

[morrik27]

Is anyone able to vouch for these? I'm looking at one for maybe going round door and window frames, dado/picture rails, skirting and the tops of kitchen cupboards - but not sure how good it's likely to be! - anyone have/used one in these situations, or rate them?

 

[big-all]

if you mean this one
http://www.toolstation.com/index.html?code=19133

then its more of a pin gun as the difference between 18 and 16g is quite a lot

ideal for light moldings like 12mm quad or 9mm txg cladding or cabinet backs

also good for pinning heavier stuff till the no nails ect goes off

definatly i m h o no good for skirting dado or cornices

 

[morrik27]

Cheers, is there anything out there you'd recommend, or should i be looking for a 16Ga gun (Don't really want to pay more than about £125-£150, if i can help it...having said that a paslode WOULD be rather nice

 

[big-all]

Cheers, is there anything out there you'd recommend, or should i be looking for a 16Ga gun (Don't really want to pay more than about £125-£150, if i can help it...having said that a paslode WOULD be rather nice

sorry morrik27

can't help you there as i only have 2 "pin" guns

 

[morrik27]

Don't you mean 12 "pin"??

 

[big-all]

Don't you mean 12 "pin"??

12"inch but i don't use it as a rule

sorry the old ones are best [ok worst ]

got one of these
http://www.dm-tools.co.uk/product.php/section//sn/ARRET100

and one of these
http://www.dm-tools.co.uk/product.php/section//sn/RYBCNS1801M