- Joined
- 11 Jan 2004
- Messages
- 42,768
- Reaction score
- 2,641
- Country
Would you upgrade the 16mm² tails on an installation if you were adding a spur to the ring?
Are you breaking the regs if you don't?
Assume you don't know what the cut-out fuse size is.
If the CU had undersized earth terminals, how would you fit a 16mm² earth?
A bit cryptic, but bear with me...
Are you breaking the regs if you don't?
Assume you don't know what the cut-out fuse size is.
If the CU had undersized earth terminals, how would you fit a 16mm² earth?
A bit cryptic, but bear with me...