Taking metal apart

[geordief]

TITLE (uneditable?)should be "Taking a tap apart"

Damn autocorrect!


Do I have to take off the little bit of red plastic at the top of the tap first?

Is there a screw underneath?


Or do I get a thin spanner an undo it that way? (I tried that without apparent success)

I don't want to go at this too roughly and leave marks behind.

The mechanism is very stiff and I want to try a little lubricant and gentle motion.

 

[petit_pablo]

Do I have to take off the little bit of red plastic at the top of the tap first?

Is there a screw underneath?

Yes and yes

 

[geordief]

Yes and yes

That's a very small red bit of plastic.Do I lever it up with a very small screwdriver?

 

[kidgreen61]

That's a very small red bit of plastic.Do I lever it up with a very small screwdriver?

Yes.
Ill bet you a virtual Pound that either the screw is seized, or the tap head is seized to the shaft.
Bin them, treat yourself to a new pair.

 

[Harry Bloomfield]

A screwdriver, or perhaps a thin blade (Stanley).

 

[CBW]

Snapped a couple of utility knife blades trying to get them out.

 

[geordief]

Might it be that those "lids" are just for decoration (and to indicate hot vs cold) in this case?


I have tried a Stanley blade and it gives no indication at all of wanting to come off-the plastic just chips and even the enamel on the tap itself is starting to chip.

It can't be the spanner job can it ?(I tried that also in the past and it didn't seem to disassemble the tap either, although it did turn

 

[geordief]

Snapped a couple of utility knife blades trying to get them out.

Oh I see.I am struggling too.Just persevere

Are we sure it has to be those little "lids"?

 

[CBW]

Are we sure it has to be those little "lids"?

Unfortunately yes. Or as suggested new taps time.

 

[geordief]

Unfortunately yes. Or as suggested new taps time.

OK to drill it and refill the hole with a bit of silicone?

 

[CBW]

OK to drill it and refill the hole with a bit of silicone?

No harm in it, a bit of a bodge, but only you looking at it.

 

[lostinthelight]

Screw a self tapping screw through the centre of the plastic ,it may jack it out

 

[jeff the gasman]

The struggle begins when the indices is removed.