Hi. I wondered if anyone's had this issue with tanking before? After applying a certain tanking kit featured on a youtube ultimate handyman video, I peeled off the masking tape I'd put along the edge of the bath...to find in places the tanking membrane peeled off the wall too (see below).
I followed the instructions - two coats of the tanking primer with drying in between, 2 coats of tanking with drying in between. Wall is bare plaster that was wiped down with a damp cloth before I started. I've now ripped the lot off, which was depressingly quick as it came off in large sheets:-
I'm pretty sure tanking should stick to the wall better than this? I think the primer's come away with the tanking, as the suction is back/the wall looks like it hasn't been touched once peeled off.
Thanks
I followed the instructions - two coats of the tanking primer with drying in between, 2 coats of tanking with drying in between. Wall is bare plaster that was wiped down with a damp cloth before I started. I've now ripped the lot off, which was depressingly quick as it came off in large sheets:-
I'm pretty sure tanking should stick to the wall better than this? I think the primer's come away with the tanking, as the suction is back/the wall looks like it hasn't been touched once peeled off.
Thanks