I have a Texecom premier 48 panel, 12 pirs, 1 door contact and 3 premier elite key pads. I have home run all the devices back to the panel.
My question is can I run an extra cable to each keypad from the panel and use the extra zones in them without having to rewire the pirs to the keypads. Also is it ok if I only use the keypad zones and not the tamper and just use the panel tamper.
Hope this all makes sense
Thanks in advance
My question is can I run an extra cable to each keypad from the panel and use the extra zones in them without having to rewire the pirs to the keypads. Also is it ok if I only use the keypad zones and not the tamper and just use the panel tamper.
Hope this all makes sense
Thanks in advance