Texecom RKP zone inputs

[chicken65]

Hi folks, just planning a Texecom Prem Elite 48 install. I will be installing an RKP at the entrance door and planned on running the mag contact and the PIR for that location from the RKP.

I know this is "supported" but what are people's experiences with this? Any issues with power when supplying a DT PIR from the RKP?

 

[Handymanjo]

Run a 8 core alarm cable to the keypad
Use the spare cores to take power from your devices back to the control panel.

 

[chicken65]

Cheers! 8-core is planned already, never know what might come along, so that will work out nicely.

 

[Alarm Engineer]

It’ll be fine, you could run two DTs off the back of the keypad. If in doubt there’s no harm in doubling up cores on the feed power to the keypad.

 

[secureiam]

you can certainly run two DT's no problem, if its a long cable run to the keypad then it may suffer, but doubt it be long in the grand scheme of things