Hi guys, this was suggested in a previous post about wiring for a cooker hood.
Take a 1.5mm or 2.5mm from a socket or the cooker circuit and fuse f/outlet at 3A or 5A depending on extractor load.
I have a recommended 3amp fused spar unit for the hood but all the socket feeds are well and truly covered with new plaster and tiles so I can't get a feed from them ! As suggested above, how do I take a feed from the cooker circuit ?
BARCUD
Take a 1.5mm or 2.5mm from a socket or the cooker circuit and fuse f/outlet at 3A or 5A depending on extractor load.
I have a recommended 3amp fused spar unit for the hood but all the socket feeds are well and truly covered with new plaster and tiles so I can't get a feed from them ! As suggested above, how do I take a feed from the cooker circuit ?
BARCUD