Thorn Emi Olympic Boiler

Joined
8 Dec 2008
Messages
7
Reaction score
0
Location
Buckinghamshire
Country
United Kingdom
My brothers boiler has been playing up. The pilot light is on the pump runs, I have changed the 3 port valve and the boiler thermostat but still no hot water or heating. The whole system is 25 years old and wondered if it could be the programmer in the airing cupboard. Please help as my brother is freezing to death and too tight to call an engineer.
 
Hmm brother? well why did you change his 3 port and or stat before we investigate?
 
Well he had hot water but no heating so thought it was the valve. After that didn't sort the problem thought it might be the thermostat as the boiler came on for a few minutes then went of. So changed that but does the same.
 
you Sure the pump is actually moving the water and not just allowing boiler to reach temp and shut down
 
blocked feed? 'brother' had hw but no ch bfore repair work started. now he has neither.
 
Well the pump is working and there is water pressure in the heating system. Thought it might be the gas valve!! I undid the drain off on the boiler and water came out so it had water in it.
 
when you open the drain off and leave it running... does your header tank start running
 
stick boiler stat to max when it turns off check for 240 at gas valve if there is you know gas valve solenoid operator is playing up and needs changing.
if no 240 it means stat has kicked in and you have a circulation proble
 
Well he had hot water but no heating so thought it was the valve. After that didn't sort the problem thought it might be the thermostat as the boiler came on for a few minutes then went of. So changed that but does the same.
If the boiler lights theres no problem with the gas valve.
Were back to 'Why isn't the water circulating'
 
Well he had hot water but no heating so thought it was the valve.

After that didn't sort the problem thought it might be the thermostat as the boiler came on for a few minutes then went off.

So changed that but does the same.

You ought to think about joining British gas.

They employ a lot of people who just change parts without actually fixing the problem!
 
Slug it is not unusaul for a gas valve solenoid to work for a few minutes then breakdown till power removed then work gain next time ,
Which is why its the easiest thing to check first
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top