Tiling bath front
- Thread starter manxcat
- Start date
Sponsored Links
Don't do it, it looks naff.
To be fair, I've never even thought about using velcro - though I don't see why it shouldn't work if you use enough.
You might need one of these to get the panel off though
http://www.tools4tilers.co.uk/product.php?xProd=88
You might need one of these to get the panel off though
http://www.tools4tilers.co.uk/product.php?xProd=88
Sponsored Links
Velcro is used to hold some panels on Jumbo Jets . . .
It is used to hold all the external panels on the Strasbourg trams.
With the right type it will hold, you will need to plan how to get it apart though, normally a "knife" is used to slide along the joint and separate the two halves - pulling normally does not work.
I used four screws into the frame, heads covered by caps, to hold mine.
It is used to hold all the external panels on the Strasbourg trams.
With the right type it will hold, you will need to plan how to get it apart though, normally a "knife" is used to slide along the joint and separate the two halves - pulling normally does not work.
I used four screws into the frame, heads covered by caps, to hold mine.
More Weetabix required.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
