Tiling downstairs bathroom

[Airiasas]

Hello everyone,

I am tiling my downstairs toilet. Tiles will be laid on concrete floor. I am looking some guidance regarding tile pattern. The pattern that fits the best at this area in my opinion is this one:

What do you guys think of this pattern? Can you give my any advice or guidance on how to do it 1st time and do it right? Thanks.

 

[johnny2007]

Your solution would be the easiest, but not the best looking.
You could go the other way, horizontally in the picture and see how you go for cuts.

 

[Airiasas]

Your solution would be the easiest, but not the best looking.
You could go the other way, horizontally in the picture and see how you go for cuts.

I tried going the other way and I did not really like how it looks cause the 3 line of tiles would have to be cut almost in half an it looked a bit odd and not symmetrical. If I would try to make it symmetrical horizontalally it would even look worse as tiles would have to be cut on both sides...

 

[Deleted member 292770]

theyr’e the wrong tiles for the room . i’d cut them so the join is in the middle.
more waste but hardly a huge waste.

 

[Tricky-Dicky]

Hi, what about a 1/3rd overlap? Used this pattern in my bathroom and ensuite.

 

[ktuludays]

theyr’e the wrong tiles for the room . i’d cut them so the join is in the middle.
more waste but hardly a huge waste.

This is exactly how I'd fit them. Joint down the middle, cuts to the wall.

 

[lostinthelight]

This is how Ive done mine when the room is less than the width of two tiles.

 

[tell80]

Looks great.

 

[Tricky-Dicky]

Not unlike my 1/3rd split suggestion, and your pic is better than my stock photo