Hi everyone, hope you can help.
I levelled my hall floor with a load of SLC on top of the original concrete floor which was solid but uneven. It went pretty well but there are a couple of areas which are approx 5mm lower.
Do I either:
1. Use a thickset adhesive to make up the difference when tiling
2. Pour a little more SLC onto the lower areas to make it as level as possible before tiling
The tiles are 30x30 and the SLC was/is Mapei Ultraplan.
Many thanks
I levelled my hall floor with a load of SLC on top of the original concrete floor which was solid but uneven. It went pretty well but there are a couple of areas which are approx 5mm lower.
Do I either:
1. Use a thickset adhesive to make up the difference when tiling
2. Pour a little more SLC onto the lower areas to make it as level as possible before tiling
The tiles are 30x30 and the SLC was/is Mapei Ultraplan.
Many thanks