TRV identification

Dave2010 · 13 Oct 2014

Can you help??

http://media.diynot.com/139000_138064_19982_20625139_thumb.jpg

I know it is DANFOSS and this one imagined is a 15mm compression but the one I have is 1/2" threaded but I assume the TRV head is the same. Im hoping to change to the following

http://www.hrhsolutions.co.uk/image/cache/data/danfoss/DANFOSS_RA5062-500x500.jpg

any ideas if it will be a simple swap?

Boilerman2 · 13 Oct 2014

The complete valve in pic 1 (15mm) has a twist to lock head, however you state that your valve is 1/2" BSP, and if so the remote dial head in pic 2 will be a straight swap.

diynot

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.

Are you a trade or supplier? You can create your listing free at DIYnot Local

TRV identification

Dave2010

Boilerman2

DIYnot Local

Similar threads