Hi all
Folks have a turbomax 282 and they are not getting consistent hot water from the taps. When i turn the hot tap on, flame ignites (orange light comes on) temp rise to about 68 degrees, hot water come out for maybe 20 secs, then orange light goes off, water goes cold.
Then same thing every 30 seconds or so.
The CH is working ok though.
No fault codes funnily enough, only status codes, I checked the status codes intermittently and they vary between S27 and S24 S14.
Any ideas?
A friend suggested that maybe the electrodes in the combustion chamber need to be realigned correctly but he said that he would have expected fault code F28 (electrode defective) for this.
Could it be diverter valve? Although the I noticed the pressure is at 0, could a faulty PRV also lead to not hot water but CH ok?
Thanks, and happy new year all.
Folks have a turbomax 282 and they are not getting consistent hot water from the taps. When i turn the hot tap on, flame ignites (orange light comes on) temp rise to about 68 degrees, hot water come out for maybe 20 secs, then orange light goes off, water goes cold.
Then same thing every 30 seconds or so.
The CH is working ok though.
No fault codes funnily enough, only status codes, I checked the status codes intermittently and they vary between S27 and S24 S14.
Any ideas?
A friend suggested that maybe the electrodes in the combustion chamber need to be realigned correctly but he said that he would have expected fault code F28 (electrode defective) for this.
Could it be diverter valve? Although the I noticed the pressure is at 0, could a faulty PRV also lead to not hot water but CH ok?
Thanks, and happy new year all.