Hi,
I have just replaced the DHW diverter valve, which involved taking the pump off. It is held by 3 screws, which seal against the valve by 2 o-rings - which are predictably worn. The manual does say to replace these when taking the boiler off- saying they are included with the pump. However as there is nothing wrong with the pump, is it possible to buy the O-rings individually for this boiler?
I cannot see them sold like that as such.
I have cleaned the old ones up as best i could, and smeared with silicone grease - but still have a very minor weep when the CH is on.
Thanks for any help.
I have just replaced the DHW diverter valve, which involved taking the pump off. It is held by 3 screws, which seal against the valve by 2 o-rings - which are predictably worn. The manual does say to replace these when taking the boiler off- saying they are included with the pump. However as there is nothing wrong with the pump, is it possible to buy the O-rings individually for this boiler?
I cannot see them sold like that as such.
I have cleaned the old ones up as best i could, and smeared with silicone grease - but still have a very minor weep when the CH is on.
Thanks for any help.