Veritas Excel Help

Joined
3 May 2011
Messages
26
Reaction score
0
Location
Lancashire
Country
United Kingdom
I have installed a veritas excel alarm 2 keypads, 4 door sensors and 4 PIR detectors, and a odyssey bell box everything is working fine but when i moved a couple of PIRS, i powered down the system and removed the battery back up.

I thought at that point the bell box should sound until either the battery is put back or the electric is switched back on but it didnt it didnt sound at all. If i set the alarm off by walking through a zone the bell box sounds no problem and the lcd's flash on the bell box fine as well.

Is there a problem with the back up battery in the bell box or have i wired something wrong.
 
Sponsored Links
Depending on the version of Odyssey you have either not fitted the wire link or jumper to enable the hold off battery.
 
Hi alarm, i installed an odyseey 4E, can you please explain what i got to do, many thanks for your reply
 
Sponsored Links
Open the sounder, then the internal cover,
Locate the red wire ( short length) and insert into the battery terminal.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top