vokera linea 24 few problems with PICS!

[shift4]

lee1982 did you get to the bottom of what the problem was? i have almost the exact problem here.

 

[scatmanjohn]

shift4...i doubt he even cares anymore, the original post is 12 months old.

Try starting a new one yourself, plenty of people will gladly help you.

 

[DP]

Have seen DHW HE taken out by mains pressure. On occasions, high mains pressure HW overpowers HW from a shower unit. Answer is to run cold tap as well.

Cold water pressure can be high in Glasgow.

 

[Paul Barker]

We don't have dhw heat ex probs with the many lineas round here. Our mains is seldom more than 3 bar.

knobs, pre blue line sit valves, front seal on DV, thermisters in that order. Only needed one pcb.

Obviously venturi has to be cleaned at each service which is a chaw as fan has to be slid forward to obtain access. But failure to clean it is cowboy servicing.

 

[scatmanjohn]

We don't have dhw heat ex probs with the many lineas round here. Our mains is seldom more than 3 bar.

knobs, pre blue line sit valves, front seal on DV, thermisters in that order. Only needed one pcb.

Obviously venturi has to be cleaned at each service which is a chaw as fan has to be slid forward to obtain access. But failure to clean it is cowboy servicing.

Leave it well alone Paul, you are not doing "servicing" you are doing a "safety inspection"

Thats why your at home @9pm and your employed colleagues are home in time for countdown

 

[nickso]

We don't have dhw heat ex probs with the many lineas round here. Our mains is seldom more than 3 bar.

knobs, pre blue line sit valves, front seal on DV, thermisters in that order. Only needed one pcb.

Obviously venturi has to be cleaned at each service which is a chaw as fan has to be slid forward to obtain access. But failure to clean it is cowboy servicing.

Leave it well alone Paul, you are not doing "servicing" you are doing a "safety inspection"

Thats why your at home @9pm and your employed colleagues are home in time for countdown

why almost no one does it is a mystery, its only 11 screws and 5 minutes of your time.