- Joined
- 7 Apr 2005
- Messages
- 17
- Reaction score
- 1
- Country
Problem as above when the hot tap is on the boiler fires up but quickly shuts off, so the water is slightly warmed then flows cold the boiler continually cycles on and off, with out getting to a constant high temperature, this happens on the hot water and central heating....
The diagphram has been changed, yes the old one had pin hole in it, but the boiler still does not get to Temperature...
Any suggestions as to the cause
The diagphram has been changed, yes the old one had pin hole in it, but the boiler still does not get to Temperature...
Any suggestions as to the cause