Hi
I'm just wanting to make sure I don't knacker anything up so here it goes
I'm connecting a Horstmann HSRF-1 wireless stat to a Glow Worm 24CI.
I have added a fused switch with a 5 amp fuse to connect the live feed to the receiver
From the receiver 2 cables run to the volt free terminal on my 24CI
Switched live volt free and volt free feed
On the boiler terminal/connection one wire is blue and one is yellow.
Am I right in thinking it does not matter which way round the 2 cables coming from the receiver are connected to the boiler?
I want to make sure rather than cause any damage
Thanks in advance
I'm just wanting to make sure I don't knacker anything up so here it goes
I'm connecting a Horstmann HSRF-1 wireless stat to a Glow Worm 24CI.
I have added a fused switch with a 5 amp fuse to connect the live feed to the receiver
From the receiver 2 cables run to the volt free terminal on my 24CI
Switched live volt free and volt free feed
On the boiler terminal/connection one wire is blue and one is yellow.
Am I right in thinking it does not matter which way round the 2 cables coming from the receiver are connected to the boiler?
I want to make sure rather than cause any damage
Thanks in advance