Want Flexi taps tails (15mm x 10mm) with Isolation valve

[mpartrid]

Hello

I am after some help, I need to fit a new tap in the kitchen, we have purchased a new monobloc tap.

I want to use flexible connectors in place of the existing copper connectors but am struggling to find one that is 10mm (to screw into tap) at one end and 15mm compression fitting at the other to fit to mains water that also has isolation valves ??

I have found this one but it doesn't have an isolation valve

http://nextday.diy.com/app/jsp/product/productPage.jsp?productId=27936

but is also says it cannot be used for drinking water ?

Can anyone help ?


Thanks

Matt

 

[TicklyT]

Try these.

Fit seperate isolating valves with a short piece of 15mm pipe to take the 15mm ends of the flexis - an isolating valve incorporated into the flexi. is no good when it's the flexi. that springs a leak.