I'm running a new pipe for a toilet but it cant go straight to the original inspection chamber (would need a 90deg bend to get to the old chamber) so I'm going to put an inspection chamber in line with the old one which will allow a rodding point. Now I have seen 30cm inspection chambers and 45cm chambers so was wondering which one I could use?
Waste Inspection Chamber
- Thread starter goooba769
- Start date
Sponsored Links
at what depth will the new chamber bottom be from ground level?
mini chambers are for shallow access only.
mini chambers are for shallow access only.
I noticed the mini chambers go up to 600mm deep which should be about right for what I need. Does that mean I could use one of these instead of the lager ones?
The size thing is mainly down to it being under my decking and to save me digging up all the concreted in posts the smaller chamber would fit ok.
The size thing is mainly down to it being under my decking and to save me digging up all the concreted in posts the smaller chamber would fit ok.
Sponsored Links
sounds like you've answered your own question. 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
