What’s this called?

Joined
23 Aug 2013
Messages
207
Reaction score
2
Location
South
Country
United Kingdom
Hello,

I’m trying to fix the top of my garden wall and replacing some broken bits but I’ve no idea what the slim brick thing is called

It’s dimensions are 27cm(ish) length, 1cm thick and 17cm wide.

Also what ratio of sand and cement 1:4 or 1:5, or something else?

Thanks
 

Attachments

  • 8FA7B6A3-4A11-4BB9-B2C4-56D700AE16C4.jpeg
    8FA7B6A3-4A11-4BB9-B2C4-56D700AE16C4.jpeg
    439.3 KB · Views: 299
That is a strange camera angle! Tile creasing?
The first picture is the top of the wall on another mini wall in my garden

It should be up here
 

Attachments

  • A0CC079F-7F24-4269-BE7A-80F467578564.jpeg
    A0CC079F-7F24-4269-BE7A-80F467578564.jpeg
    305.3 KB · Views: 451
You will probably find that they are just clay roof tiles.

They are forming tile crease, but they are not called tile crease tiles. So go to the roofing merchants not the kitchen and bathroom shop.
 
You will probably find that they are just clay roof tiles.

They are forming tile crease, but they are not called tile crease tiles. So go to the roofing merchants not the kitchen and bathroom shop.

These look like proprietary creasing tiles. They look quite flat and span the whole thickness of the wall. I think you would struggle to re-create that detail with plain roof tiles.
 
These look like proprietary creasing tiles. They look quite flat and span the whole thickness of the wall. I think you would struggle to re-create that detail with plain roof tiles.
But they are roof tile size

upload_2021-6-25_10-37-7.png
 
I believe i’ve found them on TP

https://www.travisperkins.co.uk/cla...easing-tile-red-265mm-x-165mm-x-12mm/p/445637

It’s odd as it’s in roof tiles section but in the description it says not to be used as roof tiles and says it’s flat etc and no nibs

One of my black (blue it turns out) bricks was broken and found one at Jewson made by Wienerberger and the TP creasing tile in the link above is also Wienerberger so looks promising
 
Remember to keep your mortar quite dry. There will be very little absorption from the bricks and tiles so if it is too wet you will get into a hell of a mess.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top