Its a stud wall, the timber is actually 95mm by 45mm and that will be covered, not by plasterboard but 12mm of ply, total of 107mm bolting depth.
I will be bolting a TV bracket to the timber. My question is which length and size of bolt should I use?
And what drill bit size for the pilot holes?
Edit - to clarify TV is 27kg and mount is full motion 180 degree cantilever 10kg so bolts
I will be bolting a TV bracket to the timber. My question is which length and size of bolt should I use?
And what drill bit size for the pilot holes?
Edit - to clarify TV is 27kg and mount is full motion 180 degree cantilever 10kg so bolts