I'm ripping some oak sleepers with a circular saw - cutting from both sides.
Some planks are to be 23mm and some 18mm (20mm and 15mm after putting through a planer/thicknesser).
I'm using a 40 tooth blade which is getting a bit blunt so need to get a replacement.
Would a 12 tooth, 24 tooth or 40 tooth blade be best for this particular application?
Some planks are to be 23mm and some 18mm (20mm and 15mm after putting through a planer/thicknesser).
I'm using a 40 tooth blade which is getting a bit blunt so need to get a replacement.
Would a 12 tooth, 24 tooth or 40 tooth blade be best for this particular application?