Wiring design for Attic rooms.

[Sully114]

Hi, just looking to get some advice on the lighting circuit for my house. Basically ive built two new bedrooms in the attic and was thinking of the best way to wire the lighting circuit for this level of the house. I will be getting a professional in of couse. But would there be an issue with this design. If I have a panel in the ashlar space that easily accessable. On this panel there would be a wago junciton box for each room where a feed goes up into the loft space and then to each lighting swtich for each room where the lights are setup up with standard 2 plate method for led ceiling downlights. I could then connect each wagobox on this consumer panel in a radial cirucuit on this consumer panel where a feed goes off to connect to the consumer panel. Just thinking if anything goes wrong in the future or I want to add/ troubleshoot issues its all easily accessable. Can anyone see an issue with this concept in principle. Ive added a basic plan in case what im describing is not clear..

 

[EFLImpudence]

What is the blue junction box?

 

[foxhole]

An electrician can advise on a suitable wiring layout.

 

[Sully114]

Blue box is a seperate wago for feed coming off the MCB. Just to seperate everything.

 

[EFLImpudence]

Blue box is a seperate wago for feed coming off the MCB. Just to seperate everything.

I don't understand. Why is it connected to the top left Wago box?

and

Should I know what "the ashlar space" is?

 

[Murdochcat]

Why not leave it to the spark.

I detest customers who try to tell me how to do my work and get charged more accordingly

 

[Sully114]

Becuase if I can do the donkey work and run a few cables which could save me a few quid I will. I wont be hiring an electrician that charges me more for asking a question either so no worries there.

 

[Murdochcat]

Becuase if I can do the donkey work and run a few cables which could save me a few quid I will. I wont be hiring an electrician that charges me more for asking a question either so no worries there.

I recommend you find a local spark pdq

Are BCO involved

 

[Sully114]

Thanks, your really helpful.

 

[Murdochcat]

Thanks, your really helpful.

Is your local BCO involved?

 

[Sully114]

Why so you can tell me that im not allowed to run a few cables? Im just trying to get an idea of cable routes so I can preplan things like celotexing. Your just here to troll, so if your not going to add anything then please go lay some cable somewhere else.

 

[Murdochcat]

Why so you can tell me that im not allowed to run a few cables? Im just trying to get an idea of cable routes so I can preplan things like celotexing. Your just here to troll, so if your not going to add anything then please go lay some cable somewhere else.

Oer , bit tetchy are we

So no BCO then

 

[Sully114]

Are you still here?

 

[Murdochcat]

Are you still here?

Who is that aimed at?

 

[Sully114]

If your not going to contribute to the original question then why hijack the thread? are you bored or something.