- Joined
- 14 Oct 2008
- Messages
- 24
- Reaction score
- 0
- Country
Hi guys - so the condensation trap keeps filling up on my boiler & causing it to error / shut off.
I have removed the waste exit & seems no blockage there, blown back up & all fine (bubbles away) http://screencast.com/t/gw8aXt05f0k (photo)
If i empty the trap from the clip on cover underneath it will fill again & error in a few days
the water seems to be filling up here http://screencast.com/t/p0v9zYCGq in the hopper & I guess it's meant to come out & down the flexible tube to then go out into the waste exit? but maybe isn't or what seems more likely is something is causing it to trip before it gets there & can overflow??
Any suggestions on what else to check or issue it could be?
I have removed the waste exit & seems no blockage there, blown back up & all fine (bubbles away) http://screencast.com/t/gw8aXt05f0k (photo)
If i empty the trap from the clip on cover underneath it will fill again & error in a few days
the water seems to be filling up here http://screencast.com/t/p0v9zYCGq in the hopper & I guess it's meant to come out & down the flexible tube to then go out into the waste exit? but maybe isn't or what seems more likely is something is causing it to trip before it gets there & can overflow??
Any suggestions on what else to check or issue it could be?