H
hav it
Would it be ok to mount the stat in the kitchen, as this is the coldest room in the house.. we spend most of are time in there, so we would get most use of the pre room temp settings.
N
namsag
The disadvantage of having it in kitchen is if cooker is on it cause roomstat to cut off
Read the instructions
I've had to mount my WB DT10RF in the kitchen, as the range is so poor that if I put it anywhere further from the boiler (in a more conventional location such as the lounge or dining room, for example) then the receiver keeps losing it's signal.
In it's current location, the stat is around 9m from the boiler and the signal has to pass through an external wall (ie. 2 layers of brick) due to the fact that the boiler is located in a single storey extension.
My advice is to try your stat in it's chosen location for a few weeks, before screwing it to the wall !
In it's current location, the stat is around 9m from the boiler and the signal has to pass through an external wall (ie. 2 layers of brick) due to the fact that the boiler is located in a single storey extension.
My advice is to try your stat in it's chosen location for a few weeks, before screwing it to the wall !
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
