Wylex consumer board spare bits 'n bobs?

[dpm_dpmartin]

I've done some Googling but come up short. Is there an on-line place (even tried eBay) where you can easily grab spare parts for a relatively recent Wylex consumer board? The transparent plastic flip-down cover has come off - the little protrusion at the left side and come off.

Booklet says part no. B4471/4 - not even sure if that's the Consumer Board or the booklet. The Consumer Board itself has this on that might look like a part number (I think it is) - "Cat. No. NHRS10SSLHI" - but searching for either term hasn't brought me any real joy so far.

Closest I got was - http://www.electricpoint.com/electr...visor21-consumer-unit-visor-or-cover-m74.html - but no picture and no idea if it'll fit.

I can buy the entire shell for £32 - http://www.ebay.co.uk/itm/Wylex-Con...931226?hash=item1a1412e0da:g:ejUAAOSwDV1XQyya - but that seems wasteful.

 

[securespark]

It's a 16 module board, 10way plus 2 for incomer and 4 for RCD's.

So any insulated board 16 module cover should fit. Try ringing Wylex on 0161 998 5454. Ask for Wylex technical.

 

[AndyPRK]

you used to be able to buy empty ones cheap

http://www.ebay.co.uk/itm/WYLEX-NHR...831494?hash=item3f6950a146:g:NMEAAOSwQjNW--~q

Very old that one. No worth the money

 

[securespark]

This one is better value. Buy the board, replace the visor and you have 2 RCD's and an incomer spare.

http://www.ebay.co.uk/itm/Wylex-Con...931226?hash=item1a1412e0da:g:ejUAAOSwDV1XQyya

 

[dpm_dpmartin]

Yeah, that's the same one I'd found on eBay... I might well plump for that, but I have written to the seller, on the off-chance, that he might sell and send me the plastic cover alone - you never know, he might have one lying around that he'd like to get rid of for a tenner.

 

[securespark]

Sorry, did not see you had already found this.

If you can't make use of the spare bits put them back on ebay!