- Joined
- 11 Jul 2018
- Messages
- 2
- Reaction score
- 0
- Country
I have a Yale system HSA6000 with several door contacts HSA6010 and PIR HSA6021. Recently my Door Contacts have been giving a tamper alarm when the alarm system is OFF and the door is opened. The fault will not clear and to use the alarm I have to force arm the system. The only way to remove the fault is to Remove the Device and Add is back in. It then works perfectly until I open the door (when the system is in Alarm OFF state). The tamper return and will not clear.
I feel that the tamper system is just a nuisance and this fault makes it useless. Is there a way of stopping the tamper system (NOT THE SIREN) altogether, perhaps if I remove the springs?
I feel that the tamper system is just a nuisance and this fault makes it useless. Is there a way of stopping the tamper system (NOT THE SIREN) altogether, perhaps if I remove the springs?