On a 13amp plug. Fuse had blown. Replaced. All lights and clock works, grill heats up oven doesn't but fan turns. Light indicating oven temp is lit. If oven element where does it live if not what else could it be?
Switch power off and unplug
Remove shelves
rear plate (that covers the fan) is normally held on by 4 screws 'remove those'
Element is behind this plate surrounding the fan
Quite often if the element has blown you will be able to see either a deformity in the element or a blown/melted looking part of the element
A couple of screws hold the element in place it will then come forward (be careful as several wires will be connected to spade connectors on the back. disconnect the wires (making note of what goes where and tying/taping the wires so they wont fall back into the rear cavity)
Check element for obvious damage or continuity test it (should be approx 27 ohms 'depends on element') and no continuity to earth
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local