D
dextrous
Have just had the 837 installed and it's currently running the house (3 bed semi) on one radiator circuit (2-pipe system), apart from a rad/towel warmer in the bathroom which I am shortly to upgrade and will thus install at a later date. I am competent to do wet pipework.
I want to have the bathroom rad as a separate zone to permit towels being dried/warmed during the summer whilst the remainder of the house rads are not on.
Can this be done through the use of a dual channel timer, using each channel to operate a two 2-port valves, each controlling a separate zone? Will obviously get my spark to do the wiring, but want to run a feasibility check by you all first.
I want to have the bathroom rad as a separate zone to permit towels being dried/warmed during the summer whilst the remainder of the house rads are not on.
Can this be done through the use of a dual channel timer, using each channel to operate a two 2-port valves, each controlling a separate zone? Will obviously get my spark to do the wiring, but want to run a feasibility check by you all first.