Unvented Discharge

[gasgull]

I have a customer who insists that she wants an unvented cylinder.i've checked static pressure and flow rates,both of which are ok.Only problem i can see is that she wants it fitted in the cellar.
Question.Can i take the discharge into the grated floor gully in the cellar.machine wastes current discharge into it.Are there any other limitations.fitted a few but never come accross this..
PS I do have all the necessary qualifications req'd..

 

[gas4you]

Can't see why not as long as the drain is clear and has a constant drop to the main drain outside.

 

[doitall]

Done loads in cellars, at least half discharge on the floor

 

[gaspro1981]

crack on sunshine

 

[corgiman]

i am sure you can pump the discharge too

 

[doitall]

i am sure you can pump the discharge too

You can if you take it into a sump first. you can even have an alarm on the float switch as a warning.

 

[corgiman]

i am sure you can pump the discharge too

You can if you take it into a sump first. you can even have an alarm on the float switch as a warning.

Thought so You DIA are a gent and a scholar

 

[Biggles..]

Sump has to be suitable for temp range of the discharge.