- Joined
- 5 Jul 2010
- Messages
- 171
- Reaction score
- 1
- Country
Is the actuator head from say a 1056 the same as the 1106?
My dad's 1106 has just failed. The teeth are worn so that the microswitch is not made because the toothed plate never reaches it as it slips.
No plans to change the valve body as it appears to operate just fine by hand. But unless I can find just a replacement head it looks like im going to have to buy a whole new valve, and if so I only intend on changing the head.
Any body know if the heads are the same?
My dad's 1106 has just failed. The teeth are worn so that the microswitch is not made because the toothed plate never reaches it as it slips.
No plans to change the valve body as it appears to operate just fine by hand. But unless I can find just a replacement head it looks like im going to have to buy a whole new valve, and if so I only intend on changing the head.
Any body know if the heads are the same?