when installing a basin waste I put silicone on the front face of the waste were it comes in contact with the face of the basin and also underneath in the gap between the threads and the plastic back nut. Do they seal if you do this and not use the rubber washer that usual goes underneath were you tighten the nut up?
sealing basin waste
- Thread starter XanderHarris
- Start date
Sponsored Links
I use the method that you are detailing and have very few issues
Depends on the waste and basin, should do but to be sure pop to your local merchant and buy a basin mate for the waste, work every time, also a lot less messy and easier to dismantle if you ever needed to, they are a couple of quid
Do you not need to use the rubber then? I ask as I have bought one online that has come without, so not easy to get a replacement.
Sponsored Links
If you mean the washer that goes on the underside of the basin and its causing you concern go and get a plastic 1-1/4 poly washer simples
P
Phill Peck
Get one of these
https://www.google.co.uk/search?q=b...Q&biw=1024&bih=672#biv=i|11;d|p6RjqonDlzbb-M:
Known as a basin mate
https://www.google.co.uk/search?q=b...Q&biw=1024&bih=672#biv=i|11;d|p6RjqonDlzbb-M:
Known as a basin mate
Plumbgas is you feeling unloved 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
