I have 10 spotlights in a bathroom. When removed, all are connected to choc block connectors, 3 strips per block. Of the 10 cb connectors, two have only one twin and earth cable connected, so presumably are at the end of a pareallel circuit. 7 of the connectors have two twin and earths connected, so presumably are intermediate steps in a parallel circuit. One of the connectors has 3 twin and earths connected. Would I be right in assuming that one t&e will be from the Consumer unit, one is to the switch (single pole, extenal to the bathroom) and the other then goes off to the rest of the lights? Still trying to get my head round it...thanks