Threading cables through joists - support need?

Joined
30 Mar 2012
Messages
668
Reaction score
4
Location
Monmouthshire
Country
United Kingdom
If cable is installed perp to joists, threaded thru a series on in--line holes in joists, does the cable need support additional to and between the joists? The gaps between are 320-350

Not that it seems to have made much difference to the original sparks that wired the house, there's a 1.5mm lighting cable that runs perp to joists thru holes, unsupported other than at joists.

What is recommended?
 
Last edited:
Sponsored Links
Thank you, yes, I use them when running cables along joists; they're quite popular. What is the max distance between clips? Should I knock up some batten supports between joists and clip at mid point, a bit of a faff but not really an issue. Or can I just rely on the joists when running perp to joists, as in the image?
 

Attachments

  • P_20190626_150559.jpg
    P_20190626_150559.jpg
    130.2 KB · Views: 369
Last edited:
Sponsored Links
Should I knock up some batten supports between joists and clip at mid point, a bit of a faff but not really an issue. Or can I just rely on the joists when running perp to joists, as in the image?
No need for battens, that will be fine. Can't see any image.

Be aware, you can't just drill the holes anywhere.
https://www.diynot.com/wiki/Electrics:route
 
Let them span the gap with no support but have a bit of slack so they droop a bit. If you ever need to shorten a connection at a fitting you will then have the slack to pull through if required. Nothing worse than having to remake a connection if you install a new fitting, only to find someone has cut the cables close to the ceiling or clipped it 2" before it goes through the ceiling.
 
I assumed he was talking about the bit along the joists turning from one hole before turning into another hole, rather than a straight run. It wasn't that clear in the OP what the situation was.
Maybe we were reading different OPs, since ...
If cable is installed perp to joists, threaded thru a series on in--line holes in joists, does the cable need support additional to and between the joists?
... seems pretty clear to me.

Kind Regards, John
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top