SWMBO wants the above which will sit above the (to be fitted) bathroom basin.
Is it oK to run it off the permanent live in the lighting ring or do I need to have a fused spur somewhere? The mirror hasn't been purchased yet so all I have to to work off is the diagram showing the cable position where it will pop out of the tiles. The tiler starts on Tuesday so I need to do my chases tomorrow morning.
Additionally, if I decide to use flex, what diameter should I be looking at?
Here is the mirror.
https://www.lightmirrors.co.uk/bath...rgent-wide-led-light-bathroom-mirror-502.html
It doesn't mention that it is double insulated so I assume that I will need flex with an earth. That said, as a matter of course, I would rather that the supply will have an earth, even though my consumer unit only has MCBs rather than RCDs.
Many thanks, opps.
Is it oK to run it off the permanent live in the lighting ring or do I need to have a fused spur somewhere? The mirror hasn't been purchased yet so all I have to to work off is the diagram showing the cable position where it will pop out of the tiles. The tiler starts on Tuesday so I need to do my chases tomorrow morning.
Additionally, if I decide to use flex, what diameter should I be looking at?
Here is the mirror.
https://www.lightmirrors.co.uk/bath...rgent-wide-led-light-bathroom-mirror-502.html
It doesn't mention that it is double insulated so I assume that I will need flex with an earth. That said, as a matter of course, I would rather that the supply will have an earth, even though my consumer unit only has MCBs rather than RCDs.
Many thanks, opps.