As part of a bathroom refurbishment, I would like to replace the existing Airflow QuietAir QT100T, which was not sufficient to clear steam from the 10.27m2 bathroom. Also, although this is the "silent" version, on the higher setting it is still quite loud, so I figure if I go for a "silent" in-line extractor this "should" be almost silent.
The TLC extractor fan size calculator recommends a 6" or larger in line extractor, so I would like to go with the TD SILENT 500 with Timer run on by Soler & Palau. This achieves upto 500m3/hour so should be sufficient for the calcualted 389m3/hour.
The existing extractor is wired using 3 core and earth from an isolation switch outside the bathroom. This in turn is wired into the bathroom light, so for the extractor to work, both the bathroom light and isolation switch must be ON. I would like the in-line fan to work in exactly the same way.
So far I've been unable to find ANY wiring diagrams for the TD SILENT products. Has anyone installed one of these or has access to diagrams? Before purchasing I would like to confirm how it needs to be wired up to ensure I can use the same cable and simply perform a swap of the existing extractor.
The TLC extractor fan size calculator recommends a 6" or larger in line extractor, so I would like to go with the TD SILENT 500 with Timer run on by Soler & Palau. This achieves upto 500m3/hour so should be sufficient for the calcualted 389m3/hour.
The existing extractor is wired using 3 core and earth from an isolation switch outside the bathroom. This in turn is wired into the bathroom light, so for the extractor to work, both the bathroom light and isolation switch must be ON. I would like the in-line fan to work in exactly the same way.
So far I've been unable to find ANY wiring diagrams for the TD SILENT products. Has anyone installed one of these or has access to diagrams? Before purchasing I would like to confirm how it needs to be wired up to ensure I can use the same cable and simply perform a swap of the existing extractor.